Ketju Zvm-X 520 525 530 530 kulta

For a lot of bikers, a drive chain is not really something they can get very excited about. It drives the bike, and that's about it. But it's all too easy to forget that there are in fact major differences when it comes to chain life and appearance. For example, these ZVM-X chains from D.I.D come in gold and silver. In the most popular lengths, as an open chain, and including a rivet master link. Virtually indestructible! These chains will give you long and reliable service.

Additionally reinforced X-ring chains from D.I.D, with permanent grease lubrication, are top-quality and built to last.
These open chains are supplied with the appropriate hollow rivet master link. They come in sizes 520, 525 and 530, and in various lengths.

• The best D.I.D chain available today in terms of rigidity** (10% higher than its predecessor, the ZVM2),
• with the highest wear resistance index to date.
• D.I.D X-ring seals*** halve the power loss due to friction compared to an O-ring chain

Chain colours:

• GOLD G&G - (polished gold outer and inner plates)
• SILVER - (steel-coloured)

Tensile strengths:

• 525 ZVM-X: 4720 kg
• 530 ZVM-X: 4720 kg

Wear resistance index:

• 520 ZVM-X: 3500
• 525 ZVM-X: 4000
• 530 ZVM-X: 4000

Reference: Standard chain (=100)

Good to know:
** The rigidity of a chain means its ability to resist deformation and stretching. Higher rigidity means smoother handling, less power loss and faster reaction of the chain.

*** The specially shaped sealing rings significantly alter the friction area of the side plates. At the same time, doubling the number of sealing points from 2 to 4 safeguards far more effectively against lubricant loss, and also provides optimum protection against dirt.