FixItEasy V4 Highway Vignette Holder

Area of use: For motorcycles and scooters: enables vignettes to be attached/removed on forks with a diameter of up to 8 cm without damaging the paintwork

Material/colour/size of attachment surface: plastic/black/6.9 cm x 7.4 cm (rectangular)

Properties: Moulded in one piece, permanent attachment, non-transferable

Where to install: Regulations of ASFINAG (Austrian motorway authority) for the Austrian motorway vignette:
"The holder must only be attached to a fixed component of the vehicle which is difficult to remove with tools." Luggage racks, crash bars, open handlebar ends, open footrests (to mention only a few) are not permitted attachment points. The holder must only be mounted on the steering stem of the front wheel/fork.

How to attach: Feed the holder strap around the fork and pull tight. Use a screwdriver or similar tool to ensure that the strap is fully tightened and locked in place, rather like a cable tie. Then cut off the projecting strap as close to the fork as possible, e.g. using side-cutters. Then stick the vignette to the mounting plate, which must be free of dust. Make sure that the vignette is well centred and the expiry date is clearly visible.

See the installation video for the correct method.

How to remove: Once the vignette has expired, you can remove the holder by cutting through the fastening strap with a sharp cutting tool.

Approval: With effect from 17th March 2011, FixItEasy V4 is officially approved by ASFINAG as an alternative to sticking the vignette to the vehicle itself, provided that the above method of attachment is adhered to (see the attached letter of confirmation)

Note: This vignette holder is used at the vehicle owner's own responsibility. Certified only for austria.