X-Bar, handlebar superbike X01, W: 763mm

The Highsider Pro *X01* with ABE for Germany could be the new handlebar for your superbike. This handlebar is impressive because it is about twice as rigid as standard handlebars. The construction with a 28.6 mm diameter in the clamping area and the use of a high-strength aluminium alloy is responsible for this. And you can feel it when riding: less flexing and more reserves under extreme loads. That's awesome!

• Material: aluminium
• Features: with ABE for Germany, for many models
• Dimensions in mm: (W x H) approx. 763 x 68
• Ø: 28.6 mm clamping range, 22.2 mm at the ends

Note:
The accessory handlebars are supplied without a hole for the switch unit lock. These are positioned differently depending on the motorcycle model. It is permissible to drill the handlebar for the lock: To do this, align your new handlebar optimally with the vehicle. Now mount the switch units to test, note the clearance to the tank at full steering lock, mark the hole for the lock and drill the handlebar to the appropriate diameter. If you want to avoid the drill slipping off the smooth handlebar tube during the handlebar conversion, if you tend to ‘miss the mark’ when centring or if you always drill at an angle into the workpiece, then the LSL drilling template, order no. 10005264 (see ‘Matching Products’) should serve you well - it's better to be safe than sorry, with this template such mistakes cannot happen.

Valmistaja: Paaschburg & Wunderlich GmbH | Am Alten Lokschuppen 10a | 21509 Glinde | Saksa | +49 402482770 | info@pwonline.de | www.pwonline.de