Light Unit S 3in1-LED-vilkku
Light Unit S 3in1-LED-vilkku
Light Unit S 3in1-LED-vilkku
Light Unit S 3in1-LED-vilkku
Light Unit S 3in1-LED-vilkku
Light Unit S 3in1-LED-vilkku
Light Unit S 3in1-LED-vilkku
Light Unit S 3in1-LED-vilkku
Light Unit S 3in1-LED-vilkku
Light Unit S 3in1-LED-vilkku
Light Unit S 3in1-LED-vilkku
Light Unit S 3in1-LED-vilkku
Light Unit S 3in1-LED-vilkku
Light Unit S 3in1-LED-vilkku
Rizoma

Light Unit S 3in1-LED-vilkku

Teknopolymeeri, pari

Tuotenro. 10057794
|

Ei vielä arvostelua.

159,00 € 1
Kuvaus

Light Unit S 3in1-LED-vilkku Teknopolymeeri, pari

The Rizoma *Light Unit S* 3-in-1 indicators with technopolymer holder kit give your motorbike a mega exciting look. As an indicator, rear light and brake light in a small housing, the motorbike view from the rear is spectacular. Despite their small size, the Rizoma *Light Unit S* are inspiringly bright thanks to outstanding and innovative SMD LED technology. The *Light Unit S* is one of the smallest, road-approved options in its category and fulfils the European approval standards (E-approved). The Rizoma *FR440B* technopolymer bracket kit is the stylish mount for the *Light Unit S*. Once the bracket has been fitted and connected, insert the indicator unit into the bracket and screw both together using the enclosed spanner.
Mounting options:
  • on the OEM mounts with Rizoma mounting kit and the technopolymer holders *FR440B*
  • on Rizoma licence plate holders: with indicator mounting kits and the separately available technopolymer holder *FR440B*
  • Fitting the *Light Unit S* indicators in the rear configuration always requires special wiring. In order to install the Rizoma indicators correctly on your motorbike, special cable sets are required (see matching articles).
  • matt black anodised
  • SMD LED technology
  • Functions: indicator (12 V - 1.1 W) / tail light (12 V - 0.5 W) / brake light (12 V - 0.9 W)
  • including standard resistor (10 W / 15 Ω per piece)
  • including Rizoma *FR440B* technopolymer holder
  • Thread: M8
  • only for rear
  • E-approved

Please note:
  • The Rizoma *Light Unit S* 3-in-1 multifunction indicators may only be installed in cases where:
  • Rizoma has developed a licence plate holder with a specific cable set so that the OEM rear light can be removed by installing the multifunction indicators
  • or, if the motorbike is equipped with multifunction indicators as standard and Rizoma has developed a specific cable set.
Good to know:
  • the Rizoma indicators are supplied with standard resistors (10 W / 15 Ω each). To avoid error messages appearing in the cockpit of some motorbikes (only for BMW R nine T models from 2017), it is advisable to use Rizoma resistors *EE149H* (3 W / 38 Ω), as the resistors supplied are incompatible
  • The wiring kit is required for indicator installation (see matching article)
Scope of delivery:
2 x Rizoma *Light Unit S* indicators
2 x Rizoma *FR440B* technopolymer holder
2 x standard resistor (10 W / 15 Ω per piece)
1 x spanner
Valmistaja: Rizoma Srl | Via Quarto 30/32/34 | 21010 Ferno | Italia | +39 0331242020 | info@rizoma.com | www.rizoma.com
Dokumentit
Arvostelut
Kaikki mallit
Onko sinulla vielä kysyttävää?

Onko sinulla jokin yleinen tilaustasi koskeva kysymys, haluatko antaa palautetta tai vain kertoa mielipiteesi? Olemme täällä sinua varten.

Henkilökohtaiset tiedot

Minulla on kysymys...

Valitse vaihtoehto

Valitse yhteydenottovaihtoehto

Valitse vaihtoehto

Määrittämäsi ajanjakso on virheellinen. Korjaa ajat.

Kello

Kello

Lähettämällä lomakkeen hyväksyt henkilötietojesi käsittelyn tietosuojakäytäntömme mukaisesti.

Ilmainen toimitus alkaen 119 €
Kahden vuoden palautusoikeus
Nopea toimitus
Ilmainen palautus
SearchWishlistUser AccountCartArrow LeftArrow RightArrow Right ThinIcon HomeMenuArrowCaret DownCloseResetVISAmatercardpaypalDHLHermesCheckCheck-additionalStarAdd to Shopping Cartchevron-leftchevron-rightSpinnerHeartSyncGiftchevron-upKlarnaGridListFiltersFileImagePdfWordTextExcelPowerpointArchiveCsvAudioVideoCalendar