REKISTERIKILVEN PIDIKE

Adjustable Universal License Plate Bracket

This inexpensive, universal license plate bracket can be installed on many sports and naked bikes with only minimal modification, and does away with the usual bulky plastic splash guard.

It's made of weatherproof-coated steel, 2.5-3 mm thick, and specially shaped to resist distortion and vibration. The license plate angle is infinitely variable, and the bracket also allows adjustable mounting of turn signals.

License plate light (Order no. 10033840) and reflector (Order no. 10026059, for example, are compatible.

A tail light can be fitted in place of the license plate light, if required.

Versions: A choice of 8 different models are available.

Two bracket versions plus bolts, nuts and spacer sleeves are included (see parts list). You should compare our dimensioned drawing with the tail of your motorbike to see whether an adapter needs to be made or holes drilled for mounting the bracket.

• Parts list:

1 license plate bracket, pre-assembled with two turn signal mounts, one reflector bracket and two frame bracket versions (one-piece or two-piece)

In addition:

• 4 spacer sleeves for M6 bolts, 7 mm high
• 4 black phosphatised hexagon socket screws M6 x 35 mm with self-locking nuts and washers
• 4 black phosphatised hexagon socket screws M8 x 25 mm with self-locking nuts, washers and rubber washers
• 3 black phosphatised hexagon socket screws M5 x 15 mm with self-locking nuts and washers